Untitled Document

Flexible control for individual rooms
The power and flexibility of DALI gives you full control of up to 64 devices

Control 2 takes the basic energy saving principles and adds to them to provide a comprehensive control solution for single rooms. Daylight linking, absence/presence detection and manual dimming are joined by numerous other features to make your lighting and room work smarter.

Scene Setting

A wide range of attractive sceneplates including fully customisable LCD touchpanels allows you to set the right mood at the touch of a button.

Find out more...

AV Linking

For rooms with AV controls such as those from Crestron or AMX, our AV interfaces allow perfect integration

Find out more...

Room Partitions

In areas with partition walls, let the Control 2 system automatically adjust the switching functions.

Find out more...

Linked Daylight
While a sensor in every fitting gives good energy savings, the intelligent linked sensors in Control 2 allow a single sensor to control a number of luminaires. This reduces the number of sensor needed and can produce a more even appearance to the room. Find out more...

Linked Movement
Linking movement sensors via the DALI wiring means that wherever in a room the moevemt is detected, the timers for the whole area are reset, not just the fittings nearby. The result is fewer sensors are required, and the whole area behaves as one. Find out more...

Complete Compatibility
DALI is the industry standard for dimming fluorescent luminaires, but it extends to LED drivers, Halogen transformers and even large power phase dimmers. Even non dimmable fittings can be controlled using DALI relays. Find out more...

Give us a call!

For more information, to book a site survey or just to chat about your controls requirements or questions, call us on
01279 450882

Technical Information

Control 2 components
Wiring and installation
Precommissioning check
Book a commissioning visit

Class Control
Lighting Control for learning environments

Designed with local authorities and based on Control 2, Class Control provides cost effective energy savings along with functions specifically tailored to the classroom and learning space:

Learn more...

Manual Dimming Control

Adding manaual control allows you to set the light level exactly how you like it. Studies have shown that this simple feature will save you up to 25% energy as users turn their lights down themselves.

Presence Detection

Lights are automatically turned on when you enter the room. After you leave the room, the lights switch off again after a period of time. By ensuring that the lighths are automatically switched off, you can expect to save around 25% energy.

Absence Detection

As with presence detection, the lights are automatically turned off when you leave the room. In this case however to turn the lights on you press a switch. The lights are only on when you really want them and you can save around 35% energy - another 10% over what absence detection gives you.

Daylight Linking

Luminaires compensate for available natural light by dimming the lamp until a target lighting level is reached. Dimming the lamp saves energy and on average you can expect to save around 40% with this feature.